Panasonic FP7 User Manual page 60

FTP Client Function
 Operand [S3] setting
• Specify the starting address storing the detailed setting parameter or a character constant.
• A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
• When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
• When omitting the part after a specified keyword, omit both "," and "keyword".
• When spedifying "INITIAL" or "KEEP" without specifyng parameters, the unit oprates
according to the table of special keywords.
• It is prohibited to specify the same keyword redundantly. If specified, an error occurs.
Setting
Settings
item
Timeout period
(can be omitted)
No. of retries
S3
(can be omitted)
Retry interval
(can be omitted)
(Note 1): Input a timeout period, number of retries and retry interval separated by a comma ",".
(Note 2): Upper and lower case characters can be used for sepcifying keywords.
(Note 3): Specify the detailed setting parameters in the order of the above table.
(Note 4): The retry interval can be specified by 10 seconds. It is rounded down to the 100. (Example: When specifying
38 seconds, it becomes 30 seconds.)
Setting example
Example 1 S3 "TOUT=30,RTRY=2,RTTM=500"
Settings Timeout period: 30 seconds, No. of retries: 2, Retry interval: 500 seconds
Example 2 S3 "TOUT=270,RTRY=0,RTTM=4900"
Settings Timeout period: 270 seconds, No. of retries: 0 (Not retry), Retry interval: 4900 seconds
Example 3 S3 "TOUT=30,RTRY=25"
Settings Timeout period: 30 seconds, No. of retries: 25, Retry interval: Not change
Example 4 S3 ",RTRY=25,RTTM=3000"
Settings Timeout period: Not change, No. of retries: 25, Retry interval: 3000 seconds
 Special keyword of operand [S3] setting
Special keyword
INITIAL
KEEP
Setting example
Example 1 S3 "INITIAL"
Settings Timeout period: 60 seconds, No. of retries: 3, Retry interval: 600 seconds
Example 2 S3 "KEEP"
Settings Timeout period: Not change, No. of retries: Not change, Retry interval: Not change
4-28
Specify a timeout period.
TOUT=: Time setting (Default: 60 seconds)
Specify the number of retries.
RTRY=: No. of retries (Default: 3 times)
Specify the number of retries.
RTTM=: Retry interval (Default: 600 seconds) *4
Description
Set the default.
Not change the current settings.
Setting
range
30 to 300
seconds
0 to 3
10 to 86400
seconds