Panasonic FP7 User Manual page 68

FTP Client Function
 Operand [S3] setting (when getting device)
Specify the starting address storing the destination device setting or a character constant.
Setting
Settings
item
Destination
device
No. of transferred
data (No. of data)
S3
Conversion
method
(Note 1): Input source device setting parameters and each setting parameter separated by a comma ",".
(Note 2): Specify the operation setting parameters in the order of the above table.
(Note 3): When omitting "Conversion method", it is set to unconverted 16-bit binary.
(Note 4): The number of data that can be trasferred simultaneously is 1MB for all 16 IDs. They are calculated with file
size.
4-36
・Global device
Specify device code + device number.
・Local device
"PB" + PB number + "_" (underbar) + Device code + Device
number
<Devices that can be specified>
Global device Local device
WX WX
WY WY
WR WR
WL WL
DT DT
LD LD
Specify the number of transferred data (number of data).
* The number of data that can be trasferred simultaneously
is 1MB for all 16 IDs. They are calculated with file size.
Specify a conversion method.
Parameter
Unconverted 16-bit
BIN1w
binary
16-bit unsigned
US
decimal
SS 16-bit signed decimal
32-bit unsigned
UL
decimal
SL 32-bit signed decimal
32-bit single-precision
SF
floating point
64-bit double-precision
DF
floating point
HEX1w 16bitHEX
HEX2w 32bitHEX
HEX4w 64bitHEX
ASCII character
(Output enclosed with
ASCII
"")
Setting
range
1 to 524228
Extension
(Saving format)
.BIN (binary data)
.CSV (comma-
separated text)
(512k
points)