Checking The Input Signal Status; Setting The Material Names - Panasonic AV-UHS5M6G Operating Instructions Manual

Settings related to input

Checking the input signal status

You can check the status of the NDI signal being input to this
unit.
1 Use [F1] to display the NDI Status 1/2 sub menu.
This unit automatically determines the content of the
SDI input signal and displays the following information:
Format Displays the image format information for
the NDI signal being input.
Sampling Rate Displays the sampling rate information for
the NDI signal being input.
Audio Channel
Displays the surround information for the
NDI signal being input.
2 Use [F1] to display the NDI Status 2/2 sub menu.
This unit automatically determines the content of the
SDI input signal and displays the following information:
Frame Data Displays the color information for the NDI
signal being input.
Compress Displays the compression format
information for the NDI signal being input.
Streaming Mode Displays the format information for the
NDI signal being input.

Setting the material names

Material names can be given to the input signals.
These names can be selected from the default settings or
user settings.
1 On the Input sub menu, use [F2] to select the input to
be set using the Select item.
 Refer to "Input signal settings".
2 Use [F1] to display the Name sub menu.
3 Use [F2] to select the type of material names using the
Type item.
Default
(default
settings)
User
(user settings)
p It is possible to use the Machine Name included with
the NDI signal as is as the User source name.
4 Press [F4] (Execute) in the Copy From NDI item in the
Name sub menu.
p If the Type item is User, NDI Machine Name is copied
to the Name item.
15
Select the material names from the follow-
ing:
IN1, IN2, SDI IN3 to 8, IN-A1 to 4, IN-B1
to 4
The material names are set using up to
32 characters.