Panasonic FP7 User Manual page 191

 Operand [S2] setting
• Specify the starting address storing a subject and destination group numbers (string) or a
character constant.
• More than one destination group number can be specified simultaneously (Max. 8).
Numbers are specified with bits.
Setting
Settings
item
Destination
group number
S2
Subject
(Note 1): Input each setting parameter for a subject and destination group numbers separated by a comma ",".
(Note 2): A subject and destination group numbers cannot be omitted. Specify them in the order of the above table.
The order of keywords cannot be changed.
(Note 3): Upper and lower case characters can be used for sepcifying keywords.
Setting example
Example 1 S2
Settings
Example 2 S2
Settings
Example 3 S2
Settings
Subjects automatically generated
Subject automatically generated
Logging/Trace (LOG0)
Logging/Trace (LOG1)
・・・
Logging/Trace (LOG14)
Logging/Trace (LOG15)
Specify a destination group. (0 to 7) Specify the keyword
"GRPNO=" at the beginning.
* Up to eight different group numbers connected with pluses
(+) can be selected at the same time.
Specify a mail subject.
User-specified subject
Specify a mail subject.
Specify a subject for the keyword "SUBJECT=".
SUBJECT=xxxx
Automatically-generated subject
A mail subject is automatically generated.
Specify the keyword "SUBJECTAUTO".
SUBJECTAUTO
* For details of subjects generated automatically, refer to
the section of "Subjects automatically generated".
"GRPNO=0,SUBJECT=LogFileSend"
Subject: LogFileSend, Destination group number: 0
"GrpNo=0+1+2+3+4+5,Subject=TestSend"
Subject: TestSend, Destination group numbers: 0,1,2,3,4,5
"GrpNo=0+1+2+3+4+5,SubjectAUTO"
Subject: Automatic, Destination group numbers: 0,1,2,3,4,5
6.4 How to Use Logging/Trace Mail Transmission
Setting
range
0 to 7
For a user-
specified
subject,
up to 64
characters.
6-63