Panasonic FP7 User Manual page 181

 Control relay
Name
Send request relay
Send active relay
Send retry active relay
Send done relay
Send result relay
Transfer direction relay
Reserved for system
Send cancel request relay
Send disable relay
(Note): The state of control relays can be read with ETSTAT instruction.
 Completion code
Name
Execution done code
Send done code
(Note): The state of completion codes can be read with ETSTAT instruction.
 SMTP client preparation done (WX6 bit9)
Name
SMTP client preparation
done （X69）
 Flag operation
Name Description
Set in case of out-of-range in indirect access (index modiication).
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Set when the SMTP client prepartion done (X69) is OFF at the time of the execution of
instruction.
Latest error
(SR7) Set when an out-of-range value is specified for parameters.
Hold error
Set when the send disable relay is "Send disabled".
(SR8)
Set when the send request relay of a specified ID is "Request".
Set when executed in an interrupt program.
Set when a mail transmission setting that has not been specified with the mail transmission
setting instruction or the tool software is specified.
Set when executed during when the Ethernet cable is disconnected. The detail code set in
SD29 is "10: Ethernet cable disconnected".
CY flag (SR9)
Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
Bit No. Description
0 0: No request, 1: Request
1 0: Stop, 1: During transfer
2 0: No retry, 1: During retry
3 0: During process, 1: Instruction execution complete
4 0: Normal 1: Failed
5 0: Send, 1: Receive
6 to 13 -
14 0: Not cancel, 1: Cancel
15 0: Transfer enabled, 1: Transfer disabled
No. of
Description
words
1 Execution completion code
1 Response code of SMTP client
Bit No. Description
0: SMTP client preparation incomplete, 1: SMTP client
9
preparation complete
6.3 How to Use Event Mail Transmission
6-53