Teledyne 804A User Manual page 58

804 Series Video Test Generator – User Guide
4. Touch select the lower button (Tx Port x) on the HDCP Output Test menu shown below.
5. Touch select Enable from the HDCP Output Test menu shown above.
Touch select Auto-Restart to restart HDCP authentication.
The Pass/Fail results and the key values exchanged during the authentication are presented on the screen as shown
below.
6. Repeat for each HDMI port you wish to test by selecting the lower button (Tx Port x).
Note: You will have to select each HDMI port in sequence.
Page 58 Revision B3