Teledyne 804A User Manual page 44

804 Series Video Test Generator – User Guide
3. Choose Disk mode.
The Disk selection for USB Mode in the above screen will be highlighted in green.
4. Power cycle the
804/804A/804B
The 804 will appear as a mass storage device on your PC like any other USB drive.
Note: If this is the first time you have used the 804 in the Disk mode you will have to reformat the disk. The
system will prompt you through the format process.
5. Connect the
804/804A/804B
The
804/804A/804B
6. Transfer your custom format .xml files from your PC to the FMT directory of the 804 using standard Windows
methods for transferring files to a USB drive, i.e. by dragging and dropping or copying and pasting.
Note: Your formats are limited to 8 characters with an extension (.xml).
7. Touch select the Preferences from the
Page 44
using the rocker switch on the back panel.
to a PC host via the USB cable provided.
should appear as a USB storage device.
804/804A/804B
top level menu. Refer to the screen below.
Revision B3