Teledyne 804A User Manual page 85

804 Series Video Test Generator – User Guide
Example:
NBPC 12 // sets the component bit depth to 12)
NBPC? // returns the current value.
OUTG
Command supported?: Y
Sets the enable gate of video output. (This is defaulted to 1 – only set to 0 to disable video when absolutely necessary.)
Requires FMTU or ALLU to activate.
Query returns the current setting for the enable gate for the video.
Example:
OUTG 1 // enables the outputs.
OUTG? // returns the current setting.
REDG/GRNG/BLUG
Command supported?: Y
Enables red/green/blue, respectively. (Also see XVSG.)
Requires FMTU or ALLU to activate.
Query returns the current setting for enabling red, green, blue video.
Examples:
REDG 1 // enables the red output channel.
GRNG 0 // disables the green output channel.
BLUG 1 // enables the blue output channel.
BLUG? // returns the current setting.
SCAN
Command supported?: Y
Sets the current format to either progressive (SCAN 1) or interlaced (SCAN 2).
Requires FMTU or ALLU to activate.
Query returns the current setting for the scan type.
Example:
SCAN 1 // sets the output to progressive.
SCAN? // returns the current setting.
SIRE
Command supported?: Y
Sets the IRE level on specific flat-color images.
Examples:
SIRE 50 // sets the ire level to 50%.
SIRE? // returns the current setting.
SSST
Command supported?: Y
Page 85
Query supported?: Y
Query supported?: Y
Query supported?: Y
Query supported?: Y
Query supported?: Y
Revision B3