Workflow For Loading Bitmaps From The Sd Card; Procedures For Loading Bitmaps From Sd Card - Teledyne 804A User Manual

804 Series Video Test Generator – User Guide
8.3

Workflow for loading bitmaps from the SD card

In order to load bitmaps from the 804's SD card you must take the following high level steps (detailed procedures are
provided further below):
 Create a text file called "UserPats.txt" that lists each bitmap stored for use. The name in the file has to match the name of
the bitmap. The procedures below provide an example of this text file.

Transfer the UserPats.txt file to the 804 to an SC card using a card reader.

Insert the SC card into the 804 SD slot on the front (below).
8.4

Procedures for Loading Bitmaps from SD Card

Use the procedures below to load bitmaps from an SD card.
Page 41 Revision B3