Teledyne 804A User Manual page 40

804 Series Video Test Generator – User Guide
4. Power cycle the 804/804A/804B using the rocker switch on the back panel.
The 804/804A/804B will appear as a mass storage device on your PC like any other USB drive.
5. Create the UserPats.txt text file listing your bitmaps. Use the information in Table 8-1 below to construct your text file:
Table 8-1: Importing Bitmaps – UserPats.txt file
Bitmap Name (use 8.3 naming convention)
Mast480.bmp
Mast720.bmp
Mast1080.bmp
Mast4k2k.bmp
6. Transfer your UserPats.txt file from your PC to the 804/804A/804B using standard Windows methods for transferring files
to a USB drive, i.e. by dragging and dropping or copying and pasting.
Note: Your bitmaps are limited to 8 characters with an extension (.bmp).
7. Transfer your bitmap(s) from your PC to the 804/804A/804B using standard windows procedures for transferring files to a
USB drive, i.e. dragging and dropping or copying and pasting.
8. Navigate to the Video Pattern menu.
You should now see the new bitmap image(s) on the pattern list (below).
Page 40
Bitmap Resolution UserPats.txt Text File Structure
720x480 The structure of the UserPats file is:
<Bitmap Name> space <Description>
1280x720
The contents of the UserPats.txt text file would be:
1920x1080
Mast480.bmp Master 720x480
4Kx2K
Mast720.bmp Master 1280x720
Mast1080.bmp Master 1920x1080
Mast4k2k.bmp Master 4Kx2K
Note 1: The bitmap name has to match the name of the stored
bitmap.
Note 2: The description is limited to 20 characters.
Revision B3