Teledyne 804A User Manual page 54

804 Series Video Test Generator – User Guide
11.1.2 Procedures for Testing HDMI compressed audio on an HDTV
Use the following procedures to run audio tests using Dolby and or DTS audio test patterns on the HDMI ports of an HDTV.
Refer to Table 11-1 above for specific examples for setting the options.
1. From the main menu screen (shown below), touch select Audio Pattern.
The Audio Pattern menu appears as shown below:
2. Touch select the HDMI Interface from the Audio Pattern menu as shown above.
Alternatively, to select HDMI audio through the command line:
DASI 6 // selects the HDMI audio output
FMTU // activates format
3. Touch select a compressed audio format (e.g. Dolby 5.1) on the Audio Pattern menu (refer to the screen shot above).
The following screen is an example:
Page 54 Revision B3