Teledyne 804A User Manual page 26

804 Series Video Test Generator – User Guide
Alternatively, to activate the VGA (HD15) Analog YPbPr output through the command line:
XVSI 9 // selects YPbPr Analog output through the VGA connector
SSST 1 // selects separate sync. Use SSST 3 for sync on Y
ALLU // activates the output
6. (For component analog TV displays) Touch select the VGA(HD15) Analog RGB option with the TV Format Type and
then the desired sync option using the associated activation buttons as shown below.
Alternatively, to activate RGB Analog output through the command line:
XVSI 9 // selects RGB component analog for TVs through VGA output
SSST 1 // selects separate sync. Use SSST 3 for sync on Y
ALLU // activates the output
7. (For component analog computer displays) Touch select the VGA(HD15) Analog RGB option with the Computer Format
Type and then the desired sync option using the associated activation buttons as shown below.
Alternatively, to activate RGB component analog for computers through the command line:
XVSI 9 // selects component analog for computers through VGA output
ALLU // activates the output
8. (For composite TV) Touch select the BNC + S-Video + CVBS option with the SD Format Type using the associated
activation buttons as shown below.
Page 26 Revision B3