Administrative Commands - Teledyne 804A User Manual

804 Series Video Test Generator – User Guide
15.2

Administrative Commands

BOOT
Command supported?: Y
Reboots the unit. Please note that certain functions (such as FPGA or firmware updates) will not function as intended.
DLAY
Command supported?: Y
Causes a delay before moving to the next action.
DLAY: delay
Where delay is the amount of time to wait before executing the next command.
Examples:
DLAY 500 // delays 500 millisecond before executing the next command in a command
ECHO
Command supported?: Y
Enables or disables local echo on the serial/USB COM ports.
Examples:
ECHO 0 // disables echo.
ECHO 1 // enables echo.
ECHO? // returns the current setting.
KBRD
Runs a sequence file that has been created and stored in the USERKEYS.TXT file.
Examples:
KBRD F1 // runs a sequence text string (#F1) created in the USERKEYS.TXT file.
MFGM
Command supported?: Y
Enables "Manufacturing Unit" mode which disables the touch screen and displays a status screen in its place. Setting this
mode to 1 enables the status-only screen on 804/804A units only. Setting the value to 0 enables the touch screen.
Examples:
MFGM 1
MODE
Command supported?: Y
Sets the baud rate of the unit. (Common baud rates between 1200 baud and 230400 baud are supported.)
Examples:
MODE 9600
*OPT
Command supported?: N
Returns a list of options supported on the particular 804/804A unit.
Page 92
sequence.
Query supported?: N
Query supported?: N
Query supported?: Y
Query supported?: Y
Query supported?: Y
Query supported?: Y
Revision B3