Teledyne 804A User Manual page 24

804 Series Video Test Generator – User Guide
3. Touch select the Signal Type activation button on the panel on the left. The following screen appears:
4. (For HDMI) Touch select the HDMI option using the associated activation button as shown below.
Alternatively, to activate HDMI output through the command line:
XVSI 4 // selects the HDMI output
ALLU // activates the output
Note: There are several optional settings and features related to HDMI that you may wish to utilize. They pertain to
enabling and disabling various HDMI metadata and AVmute. These options are executed through the command line.
Refer to the Command Reference
would enable or disable AVmute.
AVMG 1 // sets (enables) AVmute on the HDMI output
AVMG 0 // clears (disables) AVmute on the HDMI output
(For DVI TVs) Touch select the DVI option and then the TV option using the associated activation buttons as shown
below.
Page 24
chapter for information on these commands. The following is an example of how you
Revision B3