Teledyne 804A User Manual page 55

804 Series Video Test Generator – User Guide
4. Touch select the desired audio test pattern. (Sine Wave shown in the screen shot above.)
11.1.3 Procedures for Testing Analog Audio on an HDTV
Use the following procedures to run audio tests using PCM Sine Wave audio test patterns on the analog audio output.
1. From the main menu screen (shown below), touch select Audio Test Tone.
2. Touch select the Analog interface from the Audio Pattern menu. The following screen appears:
The Audio Pattern menu appears as shown below:
Alternatively, to select analog audio through the command line:
Page 55 Revision B3