Teledyne 804A User Manual page 75

804 Series Video Test Generator – User Guide
12. Activate the gateware (if you are updating the FPGA Flash) by touching the associated Update button.
A confirmation prompt is displayed. Touch select Confirm to initiate the firmware upgrade. (Note: The screen on your unit
may appear slightly different.)
The screen will show several messages indicating the progress of the update. Once the gateware update has completed
the following screen appears.
13. Reboot the 804/804A/804B by power cycling.
14. Navigate back to the Help menu to access the upgrade screen.
15. Activate the firmware (Application Flash) by touch selecting the associated Update button.
A confirmation prompt is displayed as shown below. Touch select Confirm to initiate the firmware upgrade.
Page 75 Revision B3