Mode Change - Sam4s NR-300 Series Operator's Manual

Mode Change

Mode Select Method
VOID, OFF, REG, X, Z, P, S
Fast Track Method
VOID:1, OFF:2, REG:3, X:4, Z:5, P:6, S:7
For Example pressing 3 then the MODE key will access Register Mode
SAM4s NR-300 Series Operator's & Programming Manual v.1.0
The Mode key can be changed by either pressing the key until the indicator is shown
under the correct mode on the display i.e.
To select register press the MODE key until the display shows an indicator under
REG
MODE
Use the fast track method by entering the number of the mode required and press the
mode key. I.e.
To select Register Mode using the fast track method enter 3 for REG and press the
MODE key
3 MODE
Introduction • 15