On Screen Displays (Osd); Menu Screen - Panasonic PV-4601 A Service Manual

On Screen Displays (OSD)

Function & Channel Display
Whenever a function button
is pushed (PLAY, FF, etc.)
or the channel is changed,
a 4 second OSD will
appear first in large and
then small characters.

Menu Screen

1
Push MENU to display t
menu.
2
Rotate and push the wheel
to make your selection.
• To get the most from each feature, it is
recommended that you read the Operation
Manual before attempting any operation.
2
VCR Status & Clock Display
Push DISPLAY to display and remove the
overlay shown below.
Function Status
REC
Rec Time
0 : 25
STEREO
Remaining
SAP
MONO
Receivable
Broadcast Types Counter
Blank Tape and will be Blue Screen
If a blank section of tape is encountered in the Play
mode or the channel you select has no broadcast,
the TV screen will change to a solid blue field.
The screen will remain blue until a recorded signal
is again detected or an active channel is selected.
FF
MENU
he
SET UP VCR
SET C LOCK
SET UP CHANNEL
I D I OMA / LANGUE : ENGL I SH
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
Time
Channel
1 2 : 0 0AM CH0 8
0 : 0 0 : 0 0
SLP
Tape Speed
Warning and Instruction Displays
These displays will alert you to a missed operation or
provide further instructions.
If no active channels are
found for CHANNEL
MEMORY...
If you attempt to set or
review a Timer Recording
and the Clock is not set...
If a Timer Program was not
completed before exiting
the Program mode...
After a Timer Program has
been set...
If you push REC on the
remote control or REC
and PLAY on the VCR,
and a cassette is inserted
with no record tab...
If you push PLAY, FF, REW,
or REC on the remote control
or if you push REC and
PLAY, PLAY, FF, REW, or
REC on the VCR without a
cassette inserted...
If you push POWER or
STOP during a Timer
Recording...
(visible in VCR mode only)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE PROGRAMMING
PROGRAM IS INCOMPLETE
TURN VCR OFF
FOR TIMER RECORDING
CHECK CASSETTE
RECORD TAB
NO CASSETTE
PLEASE INSERT A CASSETTE
TO CANCEL TIMER REC
PUSH POWER THEN STOP KEY