Panasonic PV-4601 A Service Manual page 11

Note:
1. When placing the unit into the Service Position (1), Beats may be seen in the
picture. However, when the Red Screw between the Main C.B.A. and the Power
Supply AssÕy is tightened, the Beats in the picture will be eliminated. So, place a
short ground jumper wire between the Power Supply AssÕy and the Main C.B.A.
while operating in the Service Position (1).
2. When servicing in Service Position (1), do not use a T160 tape. It may cause a Tape
Jam.
3. If misloading of the cassette tape is encountered in this position, press the
Fig. 2-1
11