Tension Arm Base Teeth in either direction as indicated by the arrow to obtain the
specified tension. (See Fig. M9).
2. Re-position the Tension Spring toward the front to increase tension, or toward the
rear to decrease tension.
3. Reinstall the Cassette Up Ass'y and verify tension with the meter once again.
4. Reinstall the Top Cover.
If the specified tension is not obtained even if the Tension Spring is re-positioned,
replace the Tension Spring, and the Tension Band, clean the Reel Table, or make
sure there is no dust between the Tension Band and the Reel Table.
188.8.131.52. HEIGHT ADJUSTMENT OF REEL TABLES