Fig. 11-1-2
b. Installation
Connect the Mechanism Chassis to the Main C.B.A., as shown below. Be sure to
press the rear portion of the mechanism chassis to insert connectors securely.
Fig. 11-2
3.3.5. How to remove the Cassette Up Ass'y
1. In the order described in the Disassembly of Cabinet Parts Section, remove the
Top Cover and Front Panel Ass'y.
2. Remove 2 Screws (S-7) and 2 Screws (S-8) in
Fig.
D7, Page 2-3.
3. Remove 2 Screws (S-14), 2 Screws (S-15), in
Fig.
D9, Page 2-3.
3.3.6. When installing the Cassette Up Ass'y
When installing the Cassette Up Ass'y onto the Mechanism Chassis, make sure that
the Cassette Up Ass'y and the mechanism are in the Eject position.
See "HOW TO INSTALL CASSETTE UP ASS'Y ONTO MECHANISM CHASSIS," Page
2-23.
3.3.7. Connection of the Flat Cable to Trap Connector
28