Reference <Notes> in Chart, Page 2-1:
1. When removing the Shield Case of the Power Supply Ass'y, twist and straighten 3
Locking Tabs (L-2) on the Power Supply AssÕy in Fig. D3. Then remove the Shield
Case by pulling it away from the Power Supply Ass'y.
2. To remove the Front Panel Ass'y:
A. Release Locking Tabs (L-4) in sequence as follows,
 Left Side  2 Top Left  2 Top Right
 Right Side  Use screwdriver for 2 Bottom
B. Work carefully so as not to break the Tabs.
To reinstall the Front Panel Ass'y:
A. Make sure as well as all locking tabs are aligned properly.
B. Press the Front Panel straight in.
If the Front Panel Ass'y is pressed in at an angle, operation buttons on the Main