4.1.3.15. HOW TO INSTALL CASSETTE UP ASS'Y ONTO MECHANISM
CHASSIS
1. Confirm that the Cassette Up Ass'y and the mechanism are in the Eject position.
(See
Fig.
A1,
Fig.
2. Carefully install the Cassette Up Ass'y onto the chassis so that all five guide pins
fit into chassis holes (See
Note:
Be sure to maintain the Eject position of Cassette Up Ass'y during installation.
To do this, hold the Cassette Holder Unit plate and the Cassette Guide Ass'y
plate so there is no movement when installing.
3. Install the 4 Red Screws as shown in
4. Confirm loading operation manually and then confirm proper operation with the
power on.
4.2. SERVICE FIXTURES AND TOOLS
B1)
Fig. J1,
J2), and the sensors fit into the Sensor Covers.
Fig. B4
Fig.
D9, Page 2-3.
112