Cassette Tape firmly into the Cassette Up Ass'y with your left thumb.
4. To install the Power Supply Ass'y to the Main C.B.A.:
Connect connector P1001 and hook the tab of the Shield Case to the slot of the
Main C.B.A. as shown in
5. When lifting up the VCR Chassis Unit, do not pull up on the Top Plate of the
Cassette Up Ass'y.
6. Model : D, E
When raising or opening the mechanism, place something insulated between the
Hi-Fi Audio/Video Head Amp Ass'y and Audio Jack.
Service Position (2)
Service position (2) is used to check the Mechanism and Electronic Circuits.