(ALIGNMENT 1)CASSETTE OPENER AND RACK Ass'y
1. Install Cassette Opener into Side Plate R Ass'y slot and slide it to the far end of the
slot.
2. Slide the Rack Ass'y in the direction shown by arrow so that the nipple of Cassette
Opener is inside the slot of Rack Ass'y as shown in Fig B2.
(ALIGNMENT 2)MAIN SHAFT UNIT AND RACK Ass'y
1. Install the Main Shaft Unit so that the projection on the Main Shaft Unit is aligned
with the groove on the Rack Ass'y as shown in Fig. B3.
(ALIGNMENT 3)WIPER ARM R UNIT AND MAIN SHAFT UNIT
1. Position the pin of Cassette Holder Unit to the far left of the Side Plate R Ass'y slot.
2. Install the Wiper Arm R Unit so that the mark on the Wiper Arm R Unit is aligned
with the hole on the Main Shaft Unit as shown in Fig. B3.
Fig. B2
110