To properly align the height of the tape wound on the Supply and Take-Up Reels.
Symptom of Misadjustment :
If the height of the tape is not properly aligned, the tape will eventually be
damaged.
* Equipment Required :
Post Adjustment Plate .................................(VFKS0010)
Reel Table Height Fixture ...........................(VFKS0009)
* Specification 0+-0.1mm
1. Remove the Cassette Up Ass'y.
2. Place the Post Adjustment Plate over the reels, and put the fixture on it. Set the
fixture to zero ("0") and ensure that the foot of the fixture touches the cut-out
portion of the plate.
3. Then measure the top portion of the Reel Table and compare the difference against
the result of the measurement taken in the above step. Do the same for the other
reel table.
Fig. M10-1
Fig. M10-2
62