Logging In And Out - Symmetricom TimeProvider 5000 User Manual

Chapter 5 Operating

Logging In And Out

Logging In And Out
The default administrator user name is "admin" with password "symmadmin**"
To login:
tp5000> login
User: <user name>
Password: <password>
To logout:
tp5000> logout
Adding And Deleting Users
Only a security-level admin user can add or delete users.
Users can be added or removed with the following commands:
set user add <username>
set user delete <username>
Saving Present Configuration To Non-volatile Memory
Use the following commands to save IMC module settings to the IOC memory and
to save the active IOC module settings in the IMC memory:
set configuration backup imc-to-ioc
set configuration backup ioc-to-imc
Restoring Default Configuration
The user can restore the TimeProvider 5000 to Symmetricom factory default
values in two ways. The
addresses
set configuration default
The
factory
MGMT port of the IMC
set configuration factory
316 TimeProvider 5000 User's Guide
default
of the MGMT port of the IMC
mode overwrites all user login information and IP addresses
, and is set with the following command:
mode preserves user login information and IP
, and is set with the following command:
098-00028-003 Revision A – June, 2011
of the