Chapter 4 Provisioning - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning

This chapter describes the procedures for provisioning the TimeProvider 5000. Use
the procedures in this chapter after you have installed and powered up the
TimeProvider 5000 (see
In This Chapter
Establishing a Connection to the TimeProvider 5000

Managing the User Access List

Provisioning the TP5000 for Login Authentication

Provisioning IMC Ethernet Port

Provisioning IOC Ethernet Ports

– Redundant Ethernet Ports
– Independent Ethernet Ports
– Ethernet Auto-Negotiation
Provisioning VLAN

Provisioning PTP

Provisioning NTP

Provisioning the Programmable E1/T1 Inputs

Provisioning the 1PPS+TOD Inputs

Provisioning the Programmable E1/T1 Outputs

Provisioning the Dedicated Outputs

Provisioning the 10MHz & 1PPS Outputs

Provisioning TP 5000 for Expansion Shelf

Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs

Provisioning Expansion Shelf PTP/SyncE Outputs

Setting the System Date and Time

Provisioning the Input Reference

– Setting the GPS Parameters
– Setting the GNSS Parameters
– Setting an E1/T1 Input as Reference
– Setting a 1PPS+TOD Input as Reference
Provisioning Alarms

Saving and Restoring Provisioning Data

Provisioning for SNMP

098-00028-003 Revision A – June, 2011
Chapter 2, Installing).
TimeProvider 5000 User's Guide 231