Symmetricom TimeProvider 5000 User Manual page 271

1544kHz Frame Type
To provision Port 1 as an input port with a frametype of 1544kHz, SSM disabled, a
Priority value of 1, and to enable the port:
Note: SSM is supported in v1.2 release, however the v1.3 release
does not support SSM for reference selection.
SSM will be supported in v2.0 release.
1. Login at the Admin or Config-user level.
2. Type
set io port1 input
3. Type
set input frametype port1 freq1544khz
4. Type
set input ssm port1 disable
5. Type
set input priority port1 1
6. Type
set input state port1 enable
D4 Frame Type
To provision Port 2 as an input port with a frametype of D4, SSM disabled, a Priority
value of 2, and to enable the port:
Note: SSM is supported in v1.2 release, however the v1.3 release
does not support SSM for reference selection.
SSM will be supported in v2.0 release.
1. Login at the Admin or Config-user level.
2. Type
set io port2 input
3. Type
set input frametype port2 d4
4. Type
set input ssm port2 disable
5. Type
set input priority port2 2
6. Type
set input state port2 enable
098-00028-003 Revision A – June, 2011
Provisioning the Programmable E1/T1 Inputs
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
Chapter 4 Provisioning
and press Enter.
TimeProvider 5000 User's Guide 271