Symmetricom TimeProvider 5000 User Manual page 202

Chapter 3
TimeProvider 5000 CLI Command Set
Example 1:
To enable port redundancy on IOC1 module 
tp5000> set redundancy port ioc1 enable
Example 2:
To set Port 1 as the active port in the redundancy configuration 
tp5000> set redundancy active-port ioc-1
Level : Config and Admin only
202 TimeProvider 5000 User's Guide
y= 1|2, the port number on the active IOC module
098-00028-003 Revision A – June, 2011