Expansion Box - Set Output-Exp Generation Command Hierarchy; Provisioning 1Pps +Tod Outputs For Expansion Shelf - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs
4. Type
set output-exp e1 holdover exp0 all on
5. Type
set output-exp e1 fast-track exp0 all ais
Figure 4-25. Expansion Box - Set Output-Exp Generation Command Hierarchy

Provisioning 1PPS +TOD Outputs for Expansion Shelf

The state of the 1PPS+TOD outputs can be provisioned on the E1/1PPS+TOD
expansion shelf, as well as the output generation behavior for each 1PPS+TOD
port.
See Figure 4-24
expansion shelf 1PPS+TOD outputs.
State of Output Ports
The state of output ports can be configured independently for individual ports on the
specified expansion shelf or all 1PPS+TOD ports can be set to the same state on
the specified expansion shelf with a single command.
1. Login at the Admin or Config-user level.
2. Type
set output-exp pps-tod state exp0 port 4 enable
288 TimeProvider 5000 User's Guide
and Figure 4-25 for the hierarchy of commands to provision the
and press Enter.
and press Enter.
and press Enter.
098-00028-003 Revision A – June, 2011