Chapter 4 Provisioning
Saving and Restoring Provisioning Data
Reference Input
Clock status of active IOC card
PTP Service Mode (GrandMaster or Probe)
Expansion shelf connections
Note: Probe mode is only available with the TP5000 platform as part
of the TimeAnalyzer 7x00.
Example
To display the system status, enter the following:
1. Type
show status
Saving and Restoring Provisioning Data
Symmetricom recommends that you keep an electronic version and/or a written
version of the provisioning changes you make to the TimeProvider 5000. Use the
set configuration
4-33.
304 TimeProvider 5000 User's Guide
and press Enter.
command to back up or restore provisioning data. See
Figure
098-00028-003 Revision A – June, 2011