Symmetricom TimeProvider 5000 User Manual page 185

Client 2: 10.21.21.101, VLAN ID=20, index=2, Clock ID: 0A:22:33:44:55:66:77:88
Synchronization interval rate = 32 per second (
Announce interval rate = 1 per second (
Delay interval rate = 16 per second (delay-int
Note: Each VLAN must be configured on a separate subnet. See
Provisioning VLAN
tp5000> set ptp addr-mode ioc1-1 unicast
tp5000> set ptp unicast static address ioc1-1 add index 1
10.11.11.101
tp5000> set ptp unicast static vlanid ioc1-1 index 1 vlanid
tp5000> set ptp unicast static clockid ioc1-1 index 1
0A:11:22:33:44:55:66:77
tp5000> set ptp unicast static sync-int ioc1-1 index 1 -4
tp5000> set ptp unicast static announce-int ioc1-1 index 1 0
tp5000> set ptp unicast static delay-int ioc1-1 index 1 -3
tp5000> set ptp unicast static state ioc1-1 index 1 enable
tp5000> set ptp unicast static address ioc1-1 add index 2
10.21.21.101
tp5000> set ptp unicast static vlanid ioc1-1 index 2 vlanid 20
tp5000> set ptp unicast static clockid ioc1-1 add index 2
0A:22:33:44:55:66:77:88
tp5000> set ptp unicast static sync-int ioc1-1 index 2 -5
tp5000> set ptp unicast static announce-int ioc1-1 index 2 0
Level : Config and Admin only
098-00028-003 Revision A – June, 2011
announce-int
set vlan
and the command for details.
Chapter 3
TimeProvider 5000 CLI Command Set
value = -5) ,
sync-int
value = 0),
value = -4
)
10
TimeProvider 5000 User's Guide 185