Command User Levels; Timeprovider 5000 Cli Command Set - Symmetricom TimeProvider 5000 User Manual

Command User Levels

The TimeProvider 5000 provides a hierarchy of CLI command user levels that
permit an increasing level of access to system parameters. This allows the system
administrator to add users who can only view but not change system parameters
and users who can view and change system parameters.
The users assigned to each security level have access options available as follows:
Level 1 - user class, with read-only rights

Level 2 - config user class, with read-write rights

Level 3 - administrator user class, with read-write rights and can also configure

users and upgrade firmware

TimeProvider 5000 CLI Command Set

This section provides an alphabetical listing and details of all CLI commands.
show alarm
Displays the system's standing (active) alarms and events.
Command Syntax:
show {alarm | event}
Example:
tp5000> show alarm
Response:
ID
---------------------------------------------------------
7
Remarks: The information displayed is expected to be identical to an entry in the
Event/Alarm Log File.
Level : User, Config, and Admin
098-00028-003 Revision A – June, 2011
Mod Severity Date-Time
IOC Minor 2009-06-08 23:38:59
Chapter 3
TimeProvider 5000 CLI Command Set
Descriptions
ETH2 Port link down
TimeProvider 5000 User's Guide 71