Serial Port Male Connector Pins; Serial Port Connector Pin Assignments; Output Connections - Symmetricom TimeProvider 5000 User Manual

Chapter 1 Overview
TimeProvider 5000 Connections
Figure 1-4 shows the EIA-232 male connector pin assignments for the serial port.
Figure 1-4.

Serial Port Male Connector Pins

Table 1-2 describes the EIA-232 connector pin assignments for the serial port.
Table 1-2. Serial Port Connector Pin Assignments
Signal
TXD (Received Data)
RXD (Transmitted Data)
Ground

Output Connections

Programmable E1 Output Connections
Two of the four traditional telecom synchronization mini-BNC ports (Port1 and
Port2) on the 090-50311-01, 090-50312-01, and 090-50315-01 versions of the I/O
module (Figure
signal types:
2.048 Mb/s (G.703/9)

2.048 MHz (G.703/13)

These ports can also be software configured as E1 inputs.
E1 Output Connections
Two of the four traditional telecom synchronization mini-BNC ports (Port3 and
Port4) on the 090-50311-01 version of the I/O module
output ports, with the following signal types:
2.048 Mb/s (G.703/9)

2.048 MHz (G.703/13)

Programmable T1 Output Connections
Two of the RJ-48C ports (I/O-1 and I/O-2) on the 090-50314-01 version of the I/O
module (Figure
signal types:
26 TimeProvider 5000 User's Guide
Pin
2
3
5
1-5) are software configurable as E1 output ports, with the following
1-6) are software configurable as T1 output ports, with the following
(Figure 1-5) are dedicated E1
098-00028-003 Revision A – June, 2011