Deleting A User - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Managing the User Access List
3. Type
set user add
name.
4. Type a user name and press SPACE and then TAB. The name you enter will be
the log-in name for the user. The system prompts you for the access-level for the
user.
5. Type in the desired access-level (user, config, or admin) and press Enter. The
system prompts you for a password.
6. Type a password and press Enter. The password you enter will be the log-in
password for the user. The system responds with the confirm password prompt.
7. Retype the password and press Enter. The system indicates that "
been added: <user>
8. Type
show user
9. Repeat steps 3 through 8 of this procedure to add other users.

Deleting A User

Use the following procedure to delete user ABCD1234 from the system access list.
Do not delete the default username and password.
1. Login at the Admin level (see
2. Type
show user
3. Type
set user delete ABCD1234
Displaying Current Users and User Access Levels
Use the following procedure to show a list of all assigned users and their access
levels.
1. Login at the Admin level (see
2. Type
show user
236 TimeProvider 5000 User's Guide
and press TAB twice. The system prompts you for a user
".
and press Enter to verify that the account exists.
Logging In, on page 235).
and press Enter to view the current list of users.
and press Enter.
Logging In, on page 235).
and press Enter. The system displays the current list of users.
CLI user has
098-00028-003 Revision A – June, 2011