Ptp/Synce Expansion Shelf; Expansion Connector On Expansion Shelf - Symmetricom TimeProvider 5000 User Manual

Chapter 1 Overview
Functional Description
Figure 1-13. PTP/SyncE Expansion Shelf
Expansion Connections
The TP5000 provides time and frequency to the expansion shelves through DTI
links in the expansion interface. The TP5000 controls and manages the expansion
shelves through Ethernet in the expansion interface. The Ethernet management link
and the DTI links share the same physical RJ-45 connector but they are logically
two separate networks.
Figure 1-14. Expansion Connector on Expansion Shelf
Figure 1-14
is a block diagram of the E1/1PPS+TOD Expansion Shelf.
diagram of the PTP/SyncE Expansion Shelf.
The following actions must be performed to support the use of expansion shelves
with the TP 5000.
Enable ETH on TP 5000 IMC module's DTI / ETH connector to allow

communication with the expansion shelves
Set a unique ID (0-9) for each expansion shelf using the rotary switch on its front

panel
Enable DTI

– TP 5000 - IMC
– TP 5000 - I/O
– Expansion shelf
Provision output signals for each expansion shelf

Enable state(s) of output(s)

Figure 1-17
Expansion Shelf.
5000 with 5 Expansion Shelves.
34 TimeProvider 5000 User's Guide
shows the Expansion connector on the expansion shelves.
is a diagram of the expansion connections for a TP 5000 with one
Figure 1-18 is a diagram of the expansion connections for a TP
Figure 1-15
Figure 1-16 is a block
098-00028-003 Revision A – June, 2011