Symmetricom TimeProvider 5000 User Manual page 172

Chapter 3
TimeProvider 5000 CLI Command Set
|....................|.......................|.....................|
| Accuracy
|....................|.......................|.....................|
| Alarm
|....................|........................|....................|
Level : User, Config, and Admin
set pps-tod
Function: to configure the pps-tod input ports state, the priority level, the
cable-delay compensation.
Command Syntax:
To provision the state for the specified 1PPS+TOD port:

set pps-tod
To provision the priority of the 1PPS+TOD input port:

set pps-tod
To provision the cable-delay of pps-tod port:

set pps-tod
Ranges:
priority = 1 - 16
cable-delay = 0 - 200000 ns, 12.5 ns resolution
Example 1:
To enable 1PPS-TOD port 1
set pps-tod
Example 2:
To provision the priority of the 1PPS+TOD input port 1 to a value of 5 
tp5000> set pps-tod
Example 3:
To provision the cable delay value for the 1PPS+TOD input port 1 to a value of 2500
ns 
tp5000> set pps-tod
Level: Config, and Admin only
172 TimeProvider 5000 User's Guide
| <value>
| 0x00
state {port1 | port2} {enable | disable}
priority {port1 | port2} <1 - 16 >
cable-delay {port1 | port2} <value>
state port1 enable
priority port1 5
cable-delay port1 2500
| n/a
| n/a
098-00028-003 Revision A – June, 2011
|
|