Locating The Gps Antenna; Antenna Connection Overview - Symmetricom TimeProvider 5000 User Manual

Ieee 1588 grand master clock / ntp server
Hide thumbs Also See for TimeProvider 5000:
Table of Contents

Advertisement

Antenna Connection Overview

The TimeProvider 5000 chassis has one antenna connection located on the front of
the IMC module. The antenna connection is made via a SMA connector, labeled
GPS. The connectors are DC isolated and AC bypassed to frame ground. This
connection is used for a radio receiver antenna connection only. Installation
procedures for GPS antennas are outlined below.
Planning the Installation
Prior to installing the antenna, you should plan the site, antenna location, grounding
scheme, cable route, and all other details.
Locating the Antenna
Use
Figure C-1
Figure C-1.

Locating the GPS Antenna

Caution: To avoid damage to the GPS antenna, do not place the
antenna where high-power radio signals are beamed directly at the
unit. Such signals can damage the preamplifier of the GPS antenna.
098-00028-003 Revision A – June, 2011
as a guide to locating the antenna.
Appendix C Installing the GPS Antenna
Antenna Installation
TimeProvider 5000 User's Guide 409

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents