Symmetricom TimeProvider 5000 User Manual page 197

show ptp-status
Use these commands to display the PTP GrandMaster status for the selected port.
Command Syntax:
show ptp-status { ioc-1 | ioc-2 | exp[0-9] port <1-16>}
Example 1:
tp5000> show ptp-status ioc-1
Response 1:
Grandmaster status information:
Port enabled
Clock Id
Addr mode
Port state
Clock class
Clock accuracy :
Timescale
Num clients
Client load
Packet load
Example 2:
To show the PTP status of the PTP port in expansion shelf 9 (id=exp8), port 15
tp5000> show ptp-status exp8 port 15
Response 2:
Grandmaster status information:
Port enabled : yes
Clock Id : 00:B0:AE:FF:FE:01:32:70, port 15
Addr mode : multicast
Port state : master [passive | listening |disabled]
Clock class : locked to reference
Clock accuracy : within 100ns
Timescale : ptp
Num clients : 1
Client load : 0%
Level : Config, and Admin
098-00028-003 Revision A – June, 2011
: yes
: 00:B0:AE:FF:FE:01:32:70
: multicast
: master
: locked to reference
within 100ns
: PTP
: 1
: 0%
: 0%
Chapter 3
TimeProvider 5000 CLI Command Set
TimeProvider 5000 User's Guide 197