Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 44

Configuring with Web Based Management
4.3 "Information" menu
● Drop-down list for language selection
● System time and date
You can change the content of this display in "System" > "System Time".
Display area (2)
In the left-hand part of the display area, the full title of the currently selected menu item is
always displayed.
● Printer
When you click this button, a pop-up window opens with a view of the page content
optimized for the printer.
● Help
When you click this button, the help page of the currently selected menu item is opened
in a new browser window.
● LED simulation
Each component of a device has one or more LEDs that provide information on the
operating state of the device. Depending on its location, direct access to the device may
not always be possible. Web Based Management therefore displays simulated LEDs. The
meaning of the LED displays is described in the operating instructions.
If you click this button, you open the window for the LED simulation. You can show this
window during a change of menu and move it as necessary. To close the LED simulation,
click the close button in the LED simulation window.
● Update on
WBM pages with overview lists can also have the additional "Update" button.
With this button, you can enable or disable updating of the content area. If updating is
turned on, the display is updated every 2 seconds. To disable the update, click "On".
Instead of "On", "Off" is displayed. As default, updating is always enabled on the WBM
page.
Navigation area (3)
In the navigation area, you have various menus available. Click the individual menus to
display the submenus. The submenus contain pages on which information is available or
with which you can create configurations. These pages are always displayed in the content
area.
44
/ Update off
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02