Faults - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.3.5

Faults

Error status
This page shows errors that occur that are configured in "Events" and "Fault Monitoring".
Errors of the "Cold/Warm Start" event can be deleted following confirmation.
If there are no more unanswered error/fault messages, the fault LED goes off.
The time calculation always begins after the last system start. When the system is restarted,
a new entry with the type of restart is created in the fault memory.
Description
The "No. of Signaled Faults" box shows the number of faults that have occurred since the
last startup. Click the "Reset Counters" button to reset this value.
The table contains the following columns:
● Fault Time
Shows the time the device has been running since the last restart when the described
fault occurred.
● Fault Description
Displays a brief description of the error that has occurred.
● Clear Fault State
To delete errors of the "Cold/Warm Start" event, click the Clear Fault State" button.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.3 "Information" menu
55