Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 40

Configuring with Web Based Management
4.2 Starting and logging in
Logon with HTTP
There are two ways in which you can log on via HTTP. You either use the logon option in the
center of the browser window or the logon option in the upper left area of the browser
window.
1. Enter the user name "admin".
2. Enter the corresponding password.
When you log on the first time or following a "Restore Factory Defaults and Restart",
enter the default password "
3. Click the "Login" button or confirm your entry with "Enter".
When you log on for the first time or following a "Restore Factory Defaults and Restart",
you will be prompted to change the password. The new password should meet the
following password policies:
– Password length: at least 8 characters
– at least 1 uppercase letter
– at least 1 special character
– at least 1 number
You need to repeat the password as confirmation. The password entries must match.
Click the "Set Values" to complete the action and activate the new password.
Once you have logged in successfully, the start page appears.
Logon with HTTPS
Web Based Management also allows you to connect to the device over the secure
connection of the HTTPS protocol. Follow these steps:
1. Click on the link "Switch to secure HTTP" on the logon page or enter "https://" and the IP
address of the device in the address box of the Internet browser.
2. Confirm the displayed certificate warning.
The logon page of Web Based Management appears.
3. Enter the user name "admin". Enter the corresponding password. When you log on the
first time or following a "Restore Factory Defaults and Restart", enter the default
password "admin".
40
".
admin
Configuration Manual, 05/2015, C79000-G8976-C388-02
SCALANCE S615 Web Based Management