Dhcp; Dhcp Client - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Procedure
Requirement:
● User name and password that gives you the right to use the DDNS service.
● Registered hostname, e.g. example.no-ip.com
● UDP port 53 for DNS is enabled and is not used for NAT.
1. In "Host", enter the hostname that you have agreed with your DDNS provider for the
device, e.g. example.no-ip-com.
2. Enter the login data (Username, Password) for the DDNS server.
3. Select Enable". This hostname is used for the device.
4. Click "Set Values".
4.4.15

DHCP

4.4.15.1

DHCP client

Setting the DHCP mode
If the DHCP mode is activated, the DHCP client starts a DHCP request to a configured
DHCP server and is assigned an IP address as the response. The server manages an
address range from which it assigns IP addresses. It is also possible to configure the server
so that the client always receives the same IP address in response to its request.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.4 "System" menu
111