Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 84

Configuring with Web Based Management
4.4 "System" menu
Description
● IP Address
Enter the IP address or the FQDN name of the station to which the device sends SNMP
traps. You can specify up to ten different recipients servers.
The table has the following columns:
● Select
Select the row you want to delete.
● IP Address
If necessary, change the IP addresses or the FQDN names of the stations.
● Trap
Enable or disable the sending of traps. Stations that are entered but not selected do not
receive SNMP traps.
Procedure
Creating a trap entry
1. In "IP Address", enter the IP address or the FQDN name of the station to which the
device sends traps.
2. Click the "Create" button to create a new trap entry.
3. Select the check box in the required row "Trap".
4. Click the "Set Values" button.
Deleting a trap entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
84
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02