Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 45

Content area (4)
In the navigation area, click a menu to display the pages of the WBM in the content area.
Below the device image, the following entries are possible:
● System Name: System name of the device
● Device Type: The type of the device
● PLUG ConfigurationShows the status of the configuration data on the PLUG, refer to the
section "System > PLUG > Configuration".
● PLUG LicenseShows the status of the license on the PLUG, refer to the section "System
> PLUG > License".
● DDNS Status
If a dynamic DNS service is used, the hostname of the device is displayed, e.g.
example.no-ip.com. The status of the update is also displayed.
– update successful
– update failed
– status unkown
● Fault Status: Displays the error status of the device.
Buttons you require often
The WBM pages contain the following standard buttons:
● Refresh the display with "Refresh"
WBM pages that display current parameters have a "Refresh" button at the lower edge of
the page. Click this button to request up-to-date information from the device for the
current page.
Note
If you click the "Refresh" button, before you have transferred your configuration changes
to the device using the "Set Values" button, your changes will be deleted and the
previous configuration will be loaded from the device and displayed here.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Update successful
Update unsuccessful
Status unknown
Configuring with Web Based Management
4.3 "Information" menu
45