Sinema Rc - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.4.18

SINEMA RC

On the WBM page, you configure the access to the SINEMA RC server.
Note
This function can only be used with a KEY-PLUG.
Description
The page contains the following:
● "Enable SINEMA RC" check box
– Enabled:
– Disabled:
● "SINEMA RC Address" input box
Enter the IPv4 address or the DNS host name of the SINEMA RC Server.
● "SINEMA RC Port" input box
Enter the port via which the WBM of the SINEMA RC Server can be reached.
● "Device ID" input box
Enter the device ID. The device ID is assigned when configuring the device on the
SINEMA RC Server. You will find further information on this in the Operating Instructions
of the SINEMA RC Server.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
A connection to the configured SINEMA RC Server is established. These boxes
cannot be edited.
The boxes can be edited. Any existing connection is terminated.
Configuring with Web Based Management
4.4 "System" menu
121