Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 72

Configuring with Web Based Management
4.4 "System" menu
Reusing configuration data
If several devices are to receive the same configuration and the IP addresses are assigned
using DHCP, the effort for configuration can be reduced by saving and reading in the
configuration data.
Follow the steps below to reuse configuration data:
1. Save the configuration data of a configured device on your PC.
2. Load this configuration file on all other devices you want to configure.
3. If individual settings are necessary for specific devices, these must be made online on the
relevant device.
Note that the configuration data is coded when it is saved. This means that you cannot edit
the files with a text editor.
72
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02