Port Based Vlan - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.6 "Layer 2" menu
Steps in configuration
1. Enter an ID in the "VLAN ID" input box.
2. Click the "Create" button. A new entry is generated in the table. As default, the boxes
have "-" entered.
3. Enter a name for the VLAN under Name.
4. Specify the use of the port in the VLAN. If, for example you select M, the port is a
member of the VLAN. The frame sent in this VLAN is forwarded with the corresponding
VLAN tag.
5. Specify the mode of the device.
6. Click the "Set Values" button.
4.6.2.2

Port Based VLAN

Processing received frames
On this WBM page, you specify the configuration of the port properties for receiving frames.
Description
Table 1 has the following columns:
● All ports
Shows that the settings are valid for all ports of table 2.
● Priority / Port VID / Acceptable Frames / Ingress Filtering
In the drop-down list, select the setting for all ports. If "No Change" is selected, the entries
of the corresponding column in Table 2 remain unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
130
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02