Lldp - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.3.7

LLDP

Status of the neighborhood table
This page shows the current content of the neighborhood table. This table stores the
information that the LLDP agent has received from connected devices.
You set the interfaces via which the LLDP agent receives or sends information in the
following section: "Layer 2 > LLDP".
Figure 4-1
Description of the displayed values
This table contains the following columns:
● System name
System name of the connected device.
● Device ID
Device ID of the connected device.
● Local Interface
Port at which the IE switch received the information.
● Hold Time
An entry remains stored in the MIB for the time specified here. If the IE switch does not
receive any new information from the connected device during this time, the entry is
deleted.
● Capability
Shows the properties of the connected device:
– Router
– Bridge
– Telephone
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Information LLDP
Configuring with Web Based Management
4.3 "Information" menu
57